This 4 in 1 bucket is 900 mm wide and is equipped with teeth, giving it superior digging abilities. Dump height of the 4 in 1 bucket is 1810mm. The Boxer mini skid steer loader has the highest lifting capacity of 476 kg of anything in its class. It is capable of lifting medium size rocks and strategically placing them to build rock retaining walls. Although marginally wider than the machine, fitting through extremely narrow gateways can be overcome by lifting the loader arms over the gateway, enabling the machine to pass through, or alternatively disconnecting the bucket, then sliding the bucket sideways through the gateway.

The Spreader Bar is used to spread material and level the surface.

The trencher can dig 150mm wide x 900mm deep.  The trencher is fitted with a crumber bar that results in the trench having minimal debris left in the bottom which would have to be manually removed with a shovel.  The trencher has a side auger enabling the dirt to be placed a small distance from the trench, reducing the amount of dirt falling back into the trench.  The trench has neat sidewalls, and the debris is loose dirt, not clods, resulting in a clean backfill.  Backfilling can be done extremely fast with the Power Box Rake, angled at 45 degrees, or in tight areas with the 4 in 1 bucket.

Trenching with the Boxer is quite fast, putting larger Bobcat style skid steer loaders and mini excavators to shame.

Augers range in size from 100mm, 200mm, 300mm, 450mm, and up to a massive 750 mm. All augers can dig to a depth of 2.1 metres, with the exception of the 100mm auger that can dig to a depth of 6 metres.

This attachment is simply amazing!  Imagine a builder's site, laden with off cuts of timber, rocks, broken tiles, concrete, bricks, sticks, clay, long grass etc.  One or two passes over this area flicks all the debris forward leaving behind freshly turned soil ready to lay turf. The Power Box Rake is capable of leveling ground and can wind row the debris ready to be removed with the 4 in 1 bucket.

The Power Box Rake is ideally suited to backfilling trenches when angled at 45 degrees.

100mm test holes can be drilled to a depth of 6 metres.  If necessary the hole can be cased for future monitoring of underground water.  Soil samples can be bagged and labeled ready for the client to test.  Larger diameter holes can be dug to a depth of 2.1 metres.

This attachment can bore a 100mm diameter hole underneath small roads, concrete driveways and pathways up to 8.2 metres in length.  Once through to the other side, the boring head can be removed and replaced with a specially designed ring feeder that can pull through conduit up to 90mm diameter, enabling permanent access for cables and pipes.

Stumps can easily be turned into sawdust with the stump grinder. The powerful 26 horsepower Boxer can handle any size stump. Most people are surprised at how quickly and efficiently stumps can disappear. How many of our competitors can access a 900mm gateway with a powerful 26 horsepower stump grinder? Be wary of smaller machines that will struggle with this sort of work, especially with Australian hard woods which are the hardest timbers in the world.

This hydraulic hammer is a RAMMER in8.  Consideration must be given to the Boxer as it is the heaviest machine and has the highest operating capacity in its class.  This all converts to its ability to provide a greater down force on the hammer.

Pallet forks are variable width.  The Boxer has a 476kg lifting capacity.

A ripper plate can be fitted to the machine, equipped with 1, 2 or 3 rippers.  Rips in the ground can be made to a depth of 300mm.

Irrigation pipes of up to 25mm diameter can be directly laid into the ground using the specially designed ripper.  Any larger pipes can easily be installed using the trencher and backfilled with the Power Box Rake angled at 45 degrees.

Awkward loads can be slung from the lifting jib and safely maneuvered into position.

35, 60 and 90 liter per minute ACTF pressure pumps and 60 lpm DAB stainless pressure pumps are available at competitive rates.